Using An S-Air Product - Sony DAV-HDX276 Operating Instructions Manual

Using an S-AIR Product

(DAV-HDX275/DAV-HDX475 only)
The unit is compatible with the S-AIR function
(page 104), which allows sound transmission
between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main unit. (The number of usable
S-AIR main unit depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
S-AIR sub unit
(S-AIR receiver)
S-AIR main unit
S-AIR sub unit
(surround amplifier)
Inserting the wireless
transmitter/transceiver
To make use of the S-AIR function, you need to
insert the wireless transmitter (not supplied) into
the unit and the wireless transceiver (not
supplied) into the S-AIR sub unit.
Note
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws and detach the slot
cover.
Rear of the unit
SPEAKER
FRONT R FRONT L SUR R SUR L
SPEAKER TV/VIDEO
DIGITAL IN
DC5V
HDMI OUT
0.7A MAX
CENTER SUBWOOFER
COAXIAL OPTICAL
Slot cover
Note
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
2
Insert the wireless transmitter.
ANTENNA
EZW-T100
FM
AM
COAXIAL 75
COMPONENT VIDEO OUT VIDEO TV/VIDEO
OUT
Y P /C P /C R AUDIO IN L
DMPORT B B R R
0 0
- T 1
E Z W
77
GB