Sony DAV-HDX276 Operating Instructions Manual page 98

Symptom
A disc cannot be ejected and
"LOCKED" appears in the front
panel display.
[Data error] appears on the TV
screen when playing a DATA
CD or DATA DVD.
The system does not work
normally.
The Control for HDMI function
does not work.
No sound is output from the
system and TV while using the
System Audio Control function.
The S-AIR function
(DAV-HDX275/DAV-HDX475 only)
Symptom
S-AIR connection is not
established (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
98
GB
Remedy
• Contact your Sony dealer or local authorized Sony service facility.
• The MP3 file/JPEG image file/DivX video file you want to play is broken
(except for United Kingdom and North American models).
• The data is not MPEG1 Audio Layer 3 data.
• The JPEG image file format does not conform to DCF.
• The JPEG image file has the extension ".JPG" or ".JPEG," but is not in JPEG
format.
• The file you want to play has the extension ".AVI" or ".DIVX" but is not in
DivX format, or is in DivX format but does not conform to a DivX Certified
profiles (except for United Kingdom and North American models).
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• When "HDMI" does not light up in the front panel display, check the HDMI
connection (page 26).
• Set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 64).
• Make sure that the connected component is compatible with the [CONTROL
FOR HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set the [CONTROL FOR HDMI]
setting in [HDMI SETUP] to [OFF], then set the [CONTROL FOR HDMI]
setting in [HDMI SETUP] to [ON] (page 64).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 73).
• Set the [AUDIO (HDMI)] setting in [CUSTOM SETUP] to [ON] (page 65).
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 73).
Remedy
• If you use another S-AIR main unit, place it more than 8 m (26
from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 78).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing of
the desired S-AIR sub unit (page 80).
• The unit is paired to another S-AIR sub unit. Cancel pairing.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
1
/ feet) away
4