Sony DAV-HDX276 Operating Instructions Manual page 78

Rear of the unit
SPEAKER TV/VIDEO
DIGITAL IN
CENTER SUBWOOFER
COAXIAL
Note
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
• Do not insert other than the wireless transmitter
into the EZW-T100 slot.
3
Make sure to use the same screws to
secure the wireless transmitter.
Rear of the unit
SPEAKER TV/VIDEO
DIGITAL IN
CENTER SUBWOOFER
COAXIAL
Note
• Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
78
GB
EZW-T100
SPEAKER
COMPONENT VIDEO OUT VIDEO
OUT
FRONT R FRONT L SUR R SUR L
DMPORT Y P B /C B P R /C R
HDMI OUT DC5V
0.7A MAX
OPTICAL
0 0
- T 1
E Z W
EZW-T100
SPEAKER
COMPONENT VIDEO OUT VIDEO
OUT
FRONT R FRONT L SUR R SUR L
DMPORT Y P B /C B P R /C R
HDMI OUT DC5V
0.7A MAX
OPTICAL
Establishing sound
transmission between the unit
ANTENNA
FM AM
COAXIAL 75
TV/VIDEO
and S-AIR sub unit
R AUDIO IN L
(ID setting)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission. You can use multiple S-AIR main
unit by setting a different ID for each
component.
To set the ID of the unit
1
2
3
ANTENNA
FM AM
COAXIAL 75
TV/VIDEO
R AUDIO IN L
4
5
6
7
8
9
Press "/1 on the unit.
The system turns on.
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
Press X/x to select
then press .
The options for [SETUP] appear.
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
Press X/x to select [S-AIR SETUP t],
then press .
Note
• When the wireless transmitter is not inserted in
the unit, [S-AIR SETUP] cannot be selected.
Press X/x to select [ID], then press
Press X/x to select the desired ID, then
press .
You can select any ID (A, B, or C).
The confirmation display appears.
[SETUP],
.