Performance-Related Characteristics And Features; Internal Drive Characteristics; Scsi Seek Performance Characteristics - Seagate Elite 9 Product Manual

Hide thumbs Also See for Elite 9:
Table of Contents

Advertisement

Elite 9 Product Manual, Rev. C
5.0
5.1
5.2
Performance-related characteristics
and features
This section provides performance-related characteristics and features of
Elite 9 drives.

Internal drive characteristics

Drive capacity, Mbytes unformatted
Read/write data heads
Bytes per track, average
Bytes per surface, Mbytes unformatted
Cylinders/tracks per surface, user accessible
Tracks per inch
Servo heads
Internal data rate, Mbits/sec, variable with zone
Disc rotation speed
Average rotational latency, msec

SCSI seek performance characteristics

All performance characteristics assume that automatic adaptive thermal
compensation is not in process when the drive receives the SCSI command.
Automatic adaptive thermal compensation will not interrupt an active SCSI
command. If adaptive thermal compensation is in process when a SCSI
command is received, the command is queued until compensation
completes. When compensation completes for the head, the first queued
SCSI command executes, and the drive continues compensation for the
remaining head(s).
The above procedure continues until compensation for all heads has
completed, or until 10 minutes have elapsed. The drive initiates an automatic
adaptive thermal compensation cycle once on power-up before completing
its initialization sequence, once after 1 minute from the end of initialization,
and then once approximately every 10 minutes. Automatic thermal
compensation occurs at other times but should be transparent to the user
(e.g., during format, at Re-Zero command, at spindle-up, during read-error
recovery, and during reassign-block functions). You can use the Re-Zero
command to reset the thermal compensation timer to its start to let the host
know when the interruption for thermal compensation will occur.
Refer to Section 11.9 and to the SCSI-2 Interface Product Manual (part
number 77738479) for additional timing details.
11
10,800
27
77,700
400
4,925
3,921
1
44 to 65
5,400 ± 0.5%
5.55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

St410800ndSt410800wSt410800nSt410800wd

Table of Contents