Sony DAV-FC7 Operating Instructions Manual page 21

FRONT R CENTER FRONT L
SURR R WOOFER SURR L
SPEAKER
TV with COMPONENT
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV to be connected.
The initial setting for Asian models is NTSC; Australian models is PAL.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing "/1 while pressing the X button on the
system. You need to hold the X button until "DAV-FC7" appears on the display. To reset to NTSC,
turn off the system and then turn on again using the remote while press and hold the X button on the
system, and turn the system off and then on again.
* If the colour system of the TV is NTSC, do the same operation above to set the system to NTSC.
To listen to the TV or game machine (ex: PlayStation 2) sound
by using the system
Connect the audio output jacks of the TV or game machine to the VIDEO 2 AUDIO IN jacks of the
system with the audio cords (optional).
Digital satellite receiver or
VCR
VIDEO VIDEO
OUT IN
AUDIO AUDIO
OUT IN
L
R
OUT IN
SCAN SELECT
SELECTABLE
INTERLACE
COMPONENT
VIDEO OUT
IN
COMPONENT
VIDEO IN
Y
P /C
B B
P /C
R R
VIDEO IN jacks
PlayStation 2 etc.
VIDEO OPTICAL
OUT
DIGITAL
OUT
AUDIO
OUT
L
R
OUT OUT
MONITOR OUT
VIDEO 1 VIDEO 2
AUDIO OUT VIDEO OUT AUDIO IN VIDEO IN
R L R L
R L
Y P /C P /C
B B R R
AUDIO IN VIDEO IN
COMPONENT VIDEO OUT
IN
INPUT
VIDEO
IN
TV
TV with S VIDEO IN jack
S VIDEO
VIDEO
AM
OPTICAL
FM
DIGITAL
75
IN
COAXIAL
VIDEO 2
IN
INPUT
S VIDEO
IN
GB
21