Storage; Service - Shop-Vac EA Series User Manual

1. The power cord can be wrapped around the cord wraps provided on the top of the
tank cover located in front and behind the handle.
2. To remove the cord from the cord wraps grasp the sides of the rear cord wrap
located behind the handle, turn counter clockwise 180° until the tip of the cord wrap
is above the handle.
3. Grasp the entire cord behind the handle and pull above the rear cord wrap, pull cord
towards the front of the vac until the cord becomes disconnected from the front cord
wrap.
4. Grasp the sides of the rear cord wrap and turn clockwise 180° to return it to its
original position.
5. Accessories may be stored in the accessory caddy. The hose may be stored in the
hose holder. To do this, place one end of the hose between the hose holder posts
and the tank bottom. Wrap the hose around the tank bottom keeping the hose tucked
between the posts and the tank bottom. The vacuum should be stored indoors.
Do not attempt to service your Shop-Vac
Refer all other servicing to a qualified service center.

STORAGE

SERVICE

wet/dry vacuum cleaner beyond that described in this manual.
®
PAGE 11