Selecting The Speaker System; Recording - Sony 5950DP Operating Instructions Manual

Selecting the speaker
system
You can select the front speaker system you
want to use by pressing the following button.
The selected speaker system appears in the
display.
Model Button
HT-9900M and SPEAKERS
HT-6900DP (OFF/A/B/A+B)
HT-5950DP SPEAKERS
(ON/OFF)
To turn off the speaker output, press the button
repeatedly until the indications in the display
turn off.
The speaker system
(HT-5950DP only)
• SP
The speakers connected to the SPEAKERS
FRONT terminals.
(HT-9900M and HT-6900DP only)
• SP A
The speakers connected to the SPEAKERS
FRONT A terminals.
• SP B
The speakers connected to the SPEAKERS
FRONT B terminals.
• SP A and SP B
The speakers connected to both the
SPEAKERS FRONT A and B terminals
(parallel connection).

Recording

Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
Indications
You can record on a cassette tape or MiniDisc
SP A
using the receiver. See the operating instructions
SP B
of your cassette deck or MD deck if you need
SP
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• (HT-9900M and HT-6900DP only) The signals input
to the MULTI CH IN jacks are not output from the
MD/TAPE OUT jacks even when MULTI CH IN is
being used. The analog audio signals of the current or
previously used input are output.
continued
41 US