Table of Contents
Advertisement
Other Operations
Naming preset stations
and inputs
You can enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver's display.
Use the buttons on the receiver for the operation.
1
To index a preset station
Press FM or AM to select the FM or AM
band, then tune in the preset station
you want to create an index name for
(page 26).
To index an input
Press the input button to select the
input you want to create an index name
for.
2
Press MAIN MENU repeatedly to select
" CUSTOM ".
3
Press
or
"NAME IN".
4
Press ENTER.
The cursor flashes and you can select a
character.
5
Use
or
index name.
Press + or – repeatedly to select a character,
then press > to move the cursor to the next
position.
Tips
• You can select the character type as follows by
pressing + or – repeatedly.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, press + or – repeatedly
until a blank space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then press + or – repeatedly to select the correct
character.
6
Press ENTER to store the index name.
US
40
repeatedly to select
and + or – to create an
Using the Sleep Timer
You can set the receiver to turn off automatically
at a specified time.
Using the remote
1
Press ALT to light up the button.
2
Press SLEEP repeatedly while the
power is on.
(HT-5950DP only)
Press SLEEP repeatedly while the power is
on.
Each time you press SLEEP, the display changes
cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t
0-30-00 t OFF
While using Sleep Timer, "SLEEP" lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press SLEEP on the receiver (HT-5950DP only) or
use the remote by pressing ALT to light up the button,
then press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
Hide quick links:
Advertisement
Table of Contents
