Table of Contents
Advertisement
α
Simple Application Controllers
5.3
View
Close System Sketch - Close the System Sketch Screen. If the screen is closed, the title will
change to Open System Sketch.
Close FBD - Close the Function Block Diagram base. If closed, the menu option will change to
Open FBD.
Standard Toolbar - When the Check mark appears, the Standard Toolbar will be displayed
onscreen.
Controller Toolbar - When the Check mark appears, the Controller Toolbar will be displayed
onscreen.
Drawing Toolbar - When the Check mark appears, the Drawing Toolbar will be displayed
onscreen.
Accessories Toolbar - When the Check mark appears, the Accessories Toolbar will be
displayed Onscreen.
Wiring Toolbar - When the Check mark appears, the Wiring Toolbar will be displayed onscreen.
Status Bar - When the Check mark appears, the Status Bar will be displayed Onscreen.
Zoom - Choose from 200, 150, 100, 75, 50, 25, or 10% zoom factor
5.4
Insert
Icons into Vacant Terminals - Input S and Output S icons will be inserted into any vacant Input
or Output Terminals, respectively.
Insert New Object - Insert a Display, OLE, or file into the System Sketch Window.
Links... - Edit links between the VLS file and other documents.
Object - Opens the application in which the selected embedded or linked object was created
so that you can edit it.
5.5
Tools
Start Auto FBD Wizard - The Auto FBD Wizard is an option to help explain function blocks and
the way in which they will perform under differing combinations and placements.
Renumber Signals - The Function Blocks will be renumbered to the lowest possible number. If
Function Blocks have been deleted, the higher numbered Function Blocks will decrease
their value to the lowest number available.
5.6
Search
By Comment - Search for a Function Block by the attached comment. The comment does not
have to be displayed nor is the search case sensitive. The text, however, must be an exact
match. If a match is found, the block will be highlighted.
By Signal Number - Search for the Function Block by the coded signal number. The alphanu-
meric sequence as it appears onscreen - one letter followed by two numbers. The letters
are not case sensitive. Ex. - M01, i06, B12.
Menu Bar Functions 5
5-2
Advertisement
Table of Contents
