Using The Sleep Timer (Sleep); Switching The Audio Input Mode (In Mode) - Sony 4-130-031-11(3) Operating Instructions Manual

Using the Sleep Timer
(SLEEP)
You can set the receiver to turn off at a preset
time when you sleep while listening to music.
You can preset the time in 10 minutes
decrements.
1
Press AMP MENU.
"SET HDMI" appears on the display.
2
Press V/v repeatedly until
"CUSTOM" appears, then press
or b.
3
Press V/v repeatedly until
"SLEEP" appears, then press
or b.
4
Press V/v repeatedly to select
the preset time.
The minutes display (the remaining time)
changes as follows:
SLP OFF y SLP 10M y SLP 20M
Y
SLP 90M y SLP 80M ...... SLP 30M
5
Press .
6
Press AMP MENU.
The AMP menu turns off.
Switching the audio input
mode
(IN MODE)
You can select the audio input mode setting
when you connect satellite tuner or set-top box
to both HDMI IN jack and optical digital input
jack on the receiver and SAT input has been
selected.
1
Press AMP MENU.
"SET HDMI" appears on the display.
2
Press V/v repeatedly to select
"CUSTOM".
3
Press
menu.
4
Press V/v repeatedly to select
"IN MODE".
5
Press
parameter.
Y
6
Press V/v repeatedly to select
the audio input mode you want.
7
Press AMP MENU.
The AMP menu turns off.
Audio input modes
x AUTO
Gives priority to HDMI audio signals if there
are both digital (HDMI and optical)
connections.
x OPT
Specifies the digital audio signals input to the
DIGITAL SAT OPT IN jack.
or b to enter the
or b to enter the
51 GB