For the surround speakers of
HT-SF360
5 mm to 7 mm
For the front and surround
speakers of HT-SS360
5 mm to 7 mm
3
Hang the speakers on the
screws.
Rear of speaker
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
• For HT-SF360, if you install the speakers on the
wall, you do not need to attach the supplied
speaker stand.
100 mm
4.6 mm
10 mm
2: Connecting the
speakers
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
B
A
FRONT R
FRONT L
Connector
A
A
E
A Speaker cord (supplied)
AFront speaker (left)
BFront speaker (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
FSubwoofer
C
F
SPEAKERS
SUR R
SUR L
CENTER
SUBWOOFER
A
D
continued
15
GB