Sony 4-130-031-11(3) Operating Instructions Manual page 14

Installing the speakers on a flat
surface
Before you install the speaker and subwoofer,
be sure to attach the supplied foot pads to
prevent vibration or movement as shown in the
illustration below.
Example of HT-SS360 front
speaker
Attach the supplied foot pad to
the below speakers
Model Speakers
HT-SF360 center speaker and subwoofer
HT-SS360 all the speakers and subwoofer
Installing the speakers on the
speaker stand
For greater flexibility in positioning the
speakers, you are recommended to use the
speaker stand below.
Model Speaker Stand
HT-SF360 Supplied. For details, refer to
the supplied speaker stand
installation guide.
HT-SS360 Optional WS-FV11 or
WS-FV10D speaker stand
(available only in certain
countries). For details, refer to
the operating instructions
supplied with the speaker
stand.
14 GB
Installing the speakers on the
wall
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
more than 25 mm
Hook on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude
5 to 7 mm.
For the center speaker
5 mm to 7 mm
For the front speakers of HT-SF360
5 mm to 7 mm
4 mm
4.6 mm
10 mm
160 mm
217 mm