Setting Up The Modem; Connecting A Computer To The Modem - ActionTec UD800TP User Manual

Setting Up
the Modem
Setting up the Modem involves two basic steps: connecting a computer to the
Modem, and configuring the Modem to activate the
software drivers.

Connecting a Computer to the Modem

The instructions in this section parallel the steps contained in the Actiontec Installation
™
Buddy , which provides a visual guide to connecting the Modem to a computer and
installing phone filters. It is recommended the user run the Installation Buddy first,
before attempting any other procedures.
To connect the Modem to a computer:
1. Insert the Actiontec Installation Buddy
computer. The Installation Buddy will start automatically. Wait until the fol-
lowing screen appears in your Internet browser window, read the onscreen
instructions, then click Next.
connection and load the
DSL
in the
CD-ROM
5
2
drive of the
CD-ROM