Light Bulbs Replacement; Wiring Diagram - Best WTD9M Series Installation Instructions Manual

16. LIGHT BULBS REPLACEMENT

This hood is equiped with two 120 V, 50 W, MR16 with GU10 base, shielded halogen bulbs.
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,
only install shielded halogen lamps. Also, never install a cool beam, a dichroic lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
To remove the bulbs, press suction cup tool (included in parts bag) on bulb and rotate counterclockwise to disengage the bulb leads from
their grooves.
Install the new bulbs by placing the bulb leads into their grooves in the socket. Gently push upwards and turn clockwise until secure.
BULB LEADS
HR0212

17. WIRING DIAGRAM

Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicable
codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally.
BLK
RED
Line
Neutral
WHT
Ground
HE0346A
COLOR CODE
BLACK WHT WHITE
RED YEL YELLOW
REF: 70103_REV-B
BLK
WHT
BLK
C
BLK
WHT
C
BLK
WHT
WARNING
!
BULB LEAD GROOVES
( )
IN SOCKET
WARNING
!
Fan switch
BLK
WHT
WHT
WHT
YEL
Lamp switch
M
M
10
HS
THERMOSTAT
RED
SPEED CONTROL
BLK
BLK
WHT
YEL
YEL
SUCTION CUP TOOL
RED