Sony 3-283-040-11(1) Operating Instructions Manual page 13

6
Adjust the height of the speaker.
Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws.
Adjust the speaker of one side, then adjust another speaker by checking lines as a guide.
Note
• When adjusting the height of the speaker, grasp the speaker so that the speaker does not fall.
Loosen two screws.
7
Take up any speaker cord slack.
Take up slack in the speaker cord by pulling from the bottom of the base.
Lines
Post
Secure the speaker cord by running
it through the slot.
Adjust the length of the cord.
,
Secure two screws.
13
GB