Step 4: Performing The Quick Setup - Sony 3-283-040-11(1) Operating Instructions Manual

Step 4: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Note
• When you connect the system and the TV with the
HDMI cable (not supplied), you need to set the type
of video output for matching your TV. For details, see
"Setting the type of video output to match your TV"
(page 27).
C/X/x/c,
1
Turn on the TV.
2
Press [/1.
Note
• Make sure that the function is set to "DVD"
(page 28).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 27) and perform
again.
4
Press without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
"/1
7
Press X/x to select the setting that
DISPLAY
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 52)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 52)
8
Press
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the unit appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
.
VIDEO SETUP
TV TYPE:
LINE:
4:3 LETTER BOX
PAUSE MODE:
4:3 PAN SCAN
.
VIDEO SETUP
TV TYPE:
LINE:
PAUSE MODE:
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
16:9
16:9
VIDEO
VIDEO VIDEO
VIDEO RGB
25
GB