Playing A Tape - Sony 290 Operating Instructions Manual

Playing a tape

1
Select a tape deck.
Press TAPE (or TAPE A/B on the unit)
repeatedly.
2
Insert a tape.
Press PUSH  
on the unit, and insert
the TYPE I (normal) tape into the cassette
holder with the side you want to play
facing forward. Make sure there is no slack
in the tape to avoid damaging the tape or
the tape deck. Press PUSH 
unit again to close the cassette holder.
3
Start playback.
Press  (or  on the unit)
eject the tape during playback or recording,
as this may cause irreparable damage to the
tape and cassette holder.
4
Adjust the volume.
Press VOLUME +/– (or turn the VOLUME
control on the unit)


on the

. Do not

.
Other operation
To Press
Pause playback
 (or  on the unit)

. To resume play, press
the button again.
Stop playback  
Rewind or fast
/
forward
Select Relay
PLAY MODE
Play*
repeatedly until "RELAY"
appears.
* After the playback of the front side of deck A, deck B
plays the front side, and then stops.
.

.

13
GB