Menus And Settings - NextBase InCar Cam 3052 Lite Instruction Manual

MENUS AND SETTINGS

MENUS AND SETTING
1. Loop Recording
Select duration of recording length for the individual video files, the iN-CAR CAM will fill the SD Card then loop
back to the beginning, overwriting the saved files (unless protected).
Default Setting: 3 Minutes
2. Record Audio
Turn On / Off audio recording.
Default Setting: On
3. Beep Sound
Turn Off / On the beep sound, note if Beep is turned off the audible low-battery warning will also be disabled.
Default Setting: On
4. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
5. Motion Detection
Turn On / Off the motion detection function, the device will need to remain on and will start a 10 second
recording when a change to the viewed scene is detected.
Default Setting: Off
6. Motion Event REC
Recording length for the each video when Motion Event worked.
Default Setting: 1 Minutes
7. LDWS
Lane Departure Warning System is function to warn the driver when the vehicle begins to move out of its lane.
Default Setting: Off
8. FCWS
ForwardCollisionWarning System is function to warn the drivewhen you are not maintaining a safe distance
between your vehicle and the vehicle in front of you.
Default Setting: Off
9. Language
Set the language as required.
Default Setting: English
10. Frequency
Set the Frequency as required.
Default Setting: 50Hz
11. Screen Saver
Turn on the Screen Saver function, shut down the screen after a period of inactivity. Press any button to
re-activate the display.
Default Setting: Off
12. G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will
automatically protect the current recording in event of a collision.
Default Setting: Middle
13. Parking Monitoring
In car power off situation, when the car is shaking by collision, camera will auto turn on to recording videos.
Default Setting: Off
7