Listening To The Sound Of A Connected Component - Sony MDR DS4000 Operating Instructions Manual

1 Operation
Listening to the Sound of a Connected
Component
Before starting operation, be sure to read "Connecting the
Headphone System" (pages 13 to 15) and make the proper
connections.
1
Turn on the component connected to the processor.
DVD player, Digital Broadcasting
Satellite Receiver or other audio
or video component
2
Remove the headphones from the processor.
The processor turns on automatically and, after about 3 seconds, the infrared
emitters grow. Then the DECODE MODE indicator lights up, depending on the
audio signal input from the connected audio or video component and the setting
of the EFFECT switch.
3
Put on the headphones.
The POWER indicator lights red, and the headphones automatically turn on.
Be sure to match the right and left side of the headphones with your ears and
wear the headphones at the correct angle so that the Auto Power On/Off function
works correctly.
GB
16
Operation
POWER
POWER
indicator