Graco 24K461 Instructions Manual
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Adapter
  5. 24K461
  6. Instructions manual
Graco 24K461 Instructions Manual

Graco 24K461 Instructions Manual

Can adapter kit
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Instructions
CAN Adapter Kit
24K461
For connecting a Discrete Gateway Module (DGM) or Communications Gateway Module (CGM) to
an HFR™ that does not have Graco tank stands or Graco heaters.
For professional use only.
Important Safety Instructions
Read all warnings and instructions in the HFR
Operation manual. Save these instructions.
PROVEN QUALITY. LEADING TECHNOLOGY.
3A1974A
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 24K461 and is the answer not in the manual?

Questions and answers

Related Manuals for Graco 24K461

Summary of Contents for Graco 24K461

  • Page 1 3A1974A 24K461 For connecting a Discrete Gateway Module (DGM) or Communications Gateway Module (CGM) to an HFR™ that does not have Graco tank stands or Graco heaters. For professional use only. Important Safety Instructions Read all warnings and instructions in the HFR Operation manual.

  • Page 2: Related Manuals

    Kit Overview This kit is used to connect a DGM or CGM to an HFR that does not have Graco tank stands or Graco heaters. This kit is not for HFR’s with ADM part number 289701. This kit enables connection of the...
  • Page 3 Installation Installation 4. Install the CAN splitter (Part No. 121807) into the DeviceNet bus bar. To prevent death or serious injury from electric shock hazard, shutdown the system and disconnect main power before installing kit. 1. Perform Shutdown procedure as described in the system manual.
  • Page 4 Installation 6. Install the supplied vinyl cap (Part No. 125738) 8. Clamp the cable into the strain relief bushing. onto the free port of the splitter. NOTICE To prevent damage to the CAN bus, when locking the CAN cable in place be sure to leave enough slack to avoid torquing the splitter or CAN bus.
  • Page 5 Parts Parts Part Description 121807 CONNECTOR, splitter 124005 BUSHING, strain relief 125738 CAP, rubber 3A1974A...
  • Page 6 Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts.

Table of Contents