International comfort products R4H4 Series Wiring Diagram Manual

WIRING DIAGRAM MANUAL
DANGER, WARNING, CAUTION, and
NOTE
The signal words DANGER, WARNING, CAU-
TION, and NOTE are used to identify levels of haz-
ard seriousness. The signal word DANGER is only
used on product labels to signify an immediate haz-
ard. The signal words WARNING, CAUTION, and
NOTE will be used on product labels and through-
out this manual and other manuals that may apply
to the product.
DANGER - Immediate hazards which will result in
severe personal injury or death.
WARNING - Hazards or unsafe practices which
could result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which
may result in minor personal injury or product or
property damage.
NOTE - Used to highlight suggestions which will
result in enhanced installation, reliability, or opera-
tion.
TABLE OF CONTENTS
Expanded Model List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
339697- 101 Wiring Diagram
339701- 101 Wiring Diagram
339903- 101 Wiring Diagram
339904- 101 Wiring Diagram
343064- 101 Wiring Diagram
MODELS
208/230- 1- 60
WCH4
Split System Heat Pump
N4H4, R4H4, WCH4

Safety Labeling and Signal Words

. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
N4H4
R4H4
Specifications subject to change without notice.
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
WARNING
!
The signal word CAUTION is used throughout this
manual in the following manner:
CAUTION
!
Signal Words on Product Labeling
Signal words are used in combination with colors
and/or pictures on product labels.
!
2
3 DEATH, PERSONAL INJURY, AND/OR PROPERTY
DAMAGE HAZARD
4
Failure to carefully read and follow this warning
5
could result in equipment malfunction, property
damage, personal injury and/or death.
6
Installation or repairs made by unqualified per-
7
sons could result in equipment malfunction, prop-
erty damage, personal injury and/or death.
The information contained in this manual is in-
tended for use by a qualified service technician fa-
miliar with safety procedures and equipped with
the proper tools and test instruments.
Installation must conform with local building
codes and with the National Electrical Code
NFPA70 current edition or Canadian Electrical
Code Part 1 CSA C.22.1.
WARNING
WARNING
428 03 5203 01 3/21/2019