Canon PIXMA iP90 Service Manual page 17

< Expected FAQ in common with the i70/PIXUS 50i>
No. * Function Symptom
1 B Paper Paper jam
feeding Paper edge creasing
3 C Installation, No infrared
Printing communication
* Occurrence level:
A: The symptom is likely to occur frequently.
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
Condition
- Plain paper (soft ones)
- About 30 sheets are loaded.
- Paper condition (curled, or cut
edge orientation)
Depending on combination of the
above conditions, the first several
pages may not feed properly.
When the printer is connected
to a certain computer (eg.
NEC, Windows 98) which
does not support Plug & Play
infrared communication.
Cause Solution
When many sheets of Reduce the number of sheets
paper are set, paper feed set on the sheet feeder, to stay
capability can be below the reference mark.
slightly lowered.
With default settings, Disable the Plug & Play
the Plug & Play function, and set the port
function is enabled. manually.
For more details regarding
'disable/enable Plug & Play
infrared Communication', see
page 2-1, New Technologies,
(3) in the PIXUS 50i / i70
Service Manual.
17
Possible call or complaint
- Paper jam
- Paper edge creasing
- Paper edge smeared
(due to contact with the
print head)
- Carriage error (service
call error) due to contact
of the print head to the
jammed paper.
- Infrared communication
is not available.