Advertisement
SUB210S PLACEMENT
The SUB210S has an innovative
design with its drivers symmetrically
positioned in opposite sides of the
cabinet and the bass reflex ports
located at the bottom of the cabinet.
Due to this particular design of the
SUB210S special requirements must
be taken into account when choosing
a location for it.
If it's intended to place the SUB210S
with any of the sides containing a
driver facing a wall, a minimum
clearance of 30cm must be allowed
from that cabinet side to the wall. It's
as well acceptable to place the
SUB210S with any of its edges very
close to a wall as long as the cabinet
side and the wall form a 45 angle. In
any case free air circulation must be
allowed through the lower openings
of the cabinet as the bass reflex ports
are located on its bottom surface.
Advertisement
