Advertisement
4. 3. Swivel Bracket
The Swivel Bracket is available as an optional accessory
for the COL speakers and allows for a single axis (pan)
adjustment of the sound beam direction. The Swivel
Bracket is optimal for those fixed installations not
requiring adjustment of the tilt angle.
To install the Swivel Bracket attach it to the wall
with the appropriate hardware (not included with
the bracket). Remove the two flat head M6 screws
located on top and bottom sides of the column.
Mount the column on the bracket, place the
supplied rubber discs between column and bracket,
and secure it with the supplied screws and washers.
When using the
recommended to install a safety cable by attaching it to any
available M6 insert point.
4. 4 Pole Mount
The 35mm Pole Mount is supplied with
the COL speakers.
To install the Pole Mount, remove the two
flat head M4 screws located at the
bottom side of the COL speaker and
attach the Pole Mount to the speaker with
the supplied screws and washers.
all
W
Bracket
or the Swivel Bracket is
Advertisement
