Related Manuals for Verity Audio COL4.3
Summary of Contents for Verity Audio COL4.3
- Page 1 C O L 4 3 C O L 4 3 B C O L 8 3 C O L 8 3 B C O L 1 6 3 C O L1 6 3 B S U B 2 10 S S U B 2 10 S B User's Manual...
- Page 2 SUB210S/SUB210SB subwoofer. B means black oudspeaker ） The COL4.3, COL8.3 and 16.3 columns are composed of four, eight and sixteen 3” full range neodymium drivers respectively. One of the major benefits of the COL speakers is the narrow vertical angle of its sound beam.
-
Page 3: Specifications
SPECIFICATIONS COL4 3/COL4 3B Acoustics Power: 120W AES, 240W Program, 480W Peak Impedance: 8Ω Sensitivity: 101dB 1W/1m half space Max. SPL @1m: 122dB Continuous, 125dB Program, 128dB Peak Frequency response: 170Hz-13.5kHz (-6dB) Horizontal directivity: 120º ±30º 800Hz-5kHz, 60º ±10º 6kHz-16kHz Vertical directivity: 20º... - Page 4 COL8 3/COL8 3B Acoustics Power: 240W AES, 480W Program, 960W Peak Impedance Ω Sensitivity: 103dB 1W/1m half space Max. SPL @1m: 127dB Continuous, 130dB Program, 133dB Peak Frequency response: 10º setting: 180Hz-16kHz (-6dB) 20º setting: 180Hz-13kHz (-6dB) Horizontal directivity: 120º ±30º 800Hz-5kHz, 50º ±15º 6kHz- 16kHz Vertical directivity: 10º...
- Page 5 2.3. COL16.3/COL16.3B Acoustics Power: 480W AES, 960W Program, 1920W Peak Impedance: Ω Sensitivity: 104dB 1W/1m half space Max. SPL @1m: 131dB Continuous, 134dB Program, 137dB Peak Frequency response: 15º setting: 180Hz-13kHz (-6dB) 30º setting: 180Hz-14kHz (-6dB) Horizontal directivity: 120º ±30º 800Hz-5kHz, 50º ±15º 6kHz-16kHz Vertical directivity: 15º...
- Page 6 2.4. SUB210S/SUB210SB Acoustics Power: 800W AES, 1600W Program, 3200W Peak Impedance: Ω Sensitivity: 96dB 1W/1m half space Max. SPL @1m: 125dB Continuous, 128dB Program, 131dB Peak Frequency response: 38Hz-500Hz (-6dB) Directivity: Omni directional in the usable range Speaker components ubwoofer 2 x 10"...
- Page 7 2.4. CURVES COL4.3 Impedance COL4.3 SPL @4m scaled to 1W/1m half space COL8.3 SPL @4m scaled to 1W/1m half space COL8.3 Impedance. Grey: 10º setting, Black: 20º setting Grey: 10º setting, Black 20º setting COL16.3 SPL @4m scaled to 1W/1m half space COL16.3 Impedance...
- Page 8 COL4.3 AND COL8.3 PLACEMENT The COL speakers can cover a big audience area with small variations in SPL by installing them with the appropriate height and tilt angle. The example diagrams below comparea COL with a standard point- source speaker in terms of SPL coverage on a certain listening plane.
- Page 9 SUB210S PLACEMENT The SUB210S has an innovative design with its drivers symmetrically positioned in opposite sides of the cabinet and the bass reflex ports located at the bottom of the cabinet. Due to this particular design of the SUB210S special requirements must be taken into account when choosing a location for it.
-
Page 10: Installation Options
The suspension cables and M6 eye bolts are not supplied. The maximum allowed length of the eye bolts thread is 20mm for the COL4.3 and 40mm for the COL8.3. Longer screws can damage internal parts of the speaker. 4 2 W... - Page 11 4. 3. Swivel Bracket The Swivel Bracket is available as an optional accessory for the COL speakers and allows for a single axis (pan) adjustment of the sound beam direction. The Swivel Bracket is optimal for those fixed installations not requiring adjustment of the tilt angle.
- Page 12 COL4.3 COL8 3 . COL16 3 . Height 1 66m 1 82m 2 16m For an optimum sound performance of the COL speakers its cabinet must be completely sealed during operation. Make sure all threaded insert points have a screw into it in order to avoid any air leakage.
- Page 13 5. WIRING The AMBIENCE loudspeakers use a high current Euroblock connector for the signal input. When wiring an AMBIENCE loudspeaker to a power amplifier use a cable with the appropriate gauge for its length. As a general rule use a 2x2.5mm2 cable for lengths up to 10m and a 2x4mm2 cable for longer lengths.
-
Page 14: Recommended Amplifier Power
6. RECOMMENDED AMPLIFIER POWER The following table shows the recommended amplifier power for the AMBIENCE loudspeakers. AMBIENCE loudspeaker Recommended Power COL4.3 /COL4.3B 250W / 8Ω COL8.3/COL8.3B 500W / 4Ω COL16.3/COL16.3B 1000W / 4Ω SUB210S/SUB210SB 1600W / 4Ω...