Anhang B: Midi-Implementation; Annexe B: Midi Implementation (Implémentation Midi); Appendice B: Midi Implementation - KETRON SD4 Owner's Manual

APPENDICE B: Midi Implementation

NOTE ON
NOTE OFF
PITCH BEND
PROGRAM CHANGE
CHANNEL AFTERTOUCH
CONTROL 00H
CONTROL 01H
CONTROL 05H
CONTROL 06H
CONTROL 07H
CONTROL 0AH
CONTROL 0BH
CONTROL 14H
CONTROL 15H
CONTROL 16H
CONTROL 17H
CONTROL 18H
CONTROL 19H
CONTROL 1AH
CONTROL 1BH
CONTROL 1CH
CONTROL 1DH
CONTROL 1EH
CONTROL 40H
CONTROL 41H
CONTROL 42H
CONTROL 43H
CONTROL 54H
CONTROL 55H
CONTROL 5BH
CONTROL 5DH
CONTROL 77H
CONTROL 78H
CONTROL 79H
CONTROL 7BH
CONTROL 7EH
CONTROL 7FH
82
9nH kk vv n(0-0FH)
8nH kk vv n(0-0FH)
EnH bl bh
BnH 00H cc
BnH 01H cc
BnH 05H cc
BnH 06H cc
BnH 07H cc
BnH 0AH cc
BnH 0BH cc
BnH 14H cc
BnH 15H cc
BnH 16H cc
BnH 17H cc
BnH 18H cc
BnH 19H cc
BnH 1AH cc
BnH 1BH cc
BnH 1CH cc
BnH 1DH cc
BnH 1EH cc
BnH 40H cc
BnH 41H cc
BnH 42H cc
BnH 43H cc
BnH 54H cc
BnH 55H cc
BnH 5BH cc
BnH 5DH cc
BnH 77H 00H
BnH 78H 00H
BnH 79H 00H
BnH 7BH 00H
BnH 7EH 00H
BnH 7FH 00H
midi channel, kk(01H-7FH)=NOTE ON
vv=velocity(01H-7FH) (vv=0 means NOTE OFF)
midi channel, kk(01H-7FH)=NOTE OFF
9nH kk 00H vv=don't care if command 8nH
Pitch Bend as specified by bl(low)
bh(high), bl=(00H-7FH),bh=(00H-7FH) 14 bit resolution.
Maximum swing is +/-1 tone (default).
(Can be changed using RPN 0000H)
Center position is bl=00H bh=40H
Min. bl=00H bh=00H, Max. bl=7FH bh=7FH
CnH pp Program change. If n=09H Drumset change.
Refer to voices or drumset list.
DnH vv v v=pressure value(00H-7FH).
see System excl. list for Aftertouch effect setting
Bank select. See voices list for details.
Modulation wheel. Rate, Assignment can be set using
System excl.
Portamento time
Data Entry. Provides data to RPN NRPN
Volume
Pan. (Default 40H)
Expression. (Default 7FH)
Draw Bar 16' , cc=amount
Draw Bar 8' , cc=amount
Draw Bar 5 ' 1/3 , cc=amount
Draw Bar 4' , cc=amount
Draw Bar 2' 2/3 , cc=amount
Draw Bar 2' , cc=amount
Draw Bar 1' 3/5 , cc=amount
Draw Bar 1' , cc=amount
Draw Bar Perc 4' , cc=amount
Draw Bar Perc 2' 2/3 , cc=amount
Rotor cc=00H off, cc=40H slow, cc=7FH fast
00H = rotor OFF ( return to default chorus )
Sustain. (Dumper pedal) On=7FH, Off=00H
Portamento. On/Off On=7FH, Off=00H
Sostenuto pedal On=7FH, Off=00H
Soft pedal On=7FH, Off=00H
Wha-Wha On/Off On=7FH Off=00h
Wha-Wha Amount cc=00H-7FH.
Auxiliary channel1 Reverb send vv=00H-7FH
Auxiliary channel2 Effects send vv=00H-7FH
(chorus,delay,distorsor)
Reset all NRPN (see note 1).
All sound off. (Abrut stop of sound on channel n)
Reset all controllers
All Notes Off
Mono on
Poly On (default)