KETRON SD4 Owner's Manual page 38

• Edit the current setting using the Value+/- keys.
The Intelligent transposer function is very useful because it allows you to maintain a good
level of fidelity of the Midifile even when it is set at a high value for the Transposer parameter.
When a sound loses its plot, it is indeed automatically restored within its natural limits.
seleCtIng the type oF global reverb
• Hold key number 2 down. The display shows "rev" and then a value that ranges from 0
to 7, which is the type of global reverb selected.
• Edit the current setting using the value+/- keys.
seleCtIng the amount oF global reverb
• Hold key number 3 down. The display shows "vol" and then a value that ranges from 0
to 16, which is the level of global reverb selected.
• Edit the current setting using the value+/- keys.
user menu
The Users are global configurations of the instrument in which all the operating parameters
of sd4 are stored and which can be customised at pleasure. There are 32 User configurations.
User number 1 is always the one to be loaded when the instrument is switched on.
re-CallIng a user
• Press the "user" key to access the relative menu. The LED starts blinking and the display
shows the number of the User currently in use.
• Enter the number of the User to be loaded using the numerical keypad 0-9 or use the
value +/- keys to scroll the users available.
• Press the user key again to exit the menu.
savIng a user
Once all the operating parameters of sd4 have been set, you can save the instrument's status
by saving it in a User.
• Press the user key.
• Hold the "save" button down for a few seconds until the display starts blinking.
• Enter the location where the current configuration is to be saved using the numerical
keypad (from 1 to 32).
• Press the Save key again to confirm the procedure and save it in the memory.
lead oFF
If you hold the Lead Off button down for a few seconds, the Midifile song will be muted. The
default setting of this function affects channel 4 but you can edit its value in the Function
menu.
sd4edItor
SD4Editor is a dedicated software program used to edit the Presets of SD4. You can download
it from the official website of Ketron (www.ketron.it). Using this program, you can edit the
Presets very quickly using a PC with USB port. Once the program is opened, if SD4 is connec-
ted via the USB cable, all the parameters making up the Preset currently selected on SD4 are
38