Channel Settings - Sony Bravia KDL-52WL130 Operating Instructions Manual

Audio Out
Easy control of volume
adjustment
~
• Alternate Audio is available only for digital programs. If the program you are watching is also available in other
languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.

Channel Settings

Cable
Auto Program
Add Digital Channels Select to add digital channels. Be sure to have the Cable option selected appropriately for
Show/Hide Channels
Edit Channel Labels
40
Fixed
Select to fix the audio output and allow you to adjust the volume with
your audio system's remote control. (The TV's remote control's VOL
and MUTING buttons have no effect on Audio Out.)
Variable Select to control the Audio Out's volume and muting with your TV's
remote control.
On
For receiving cable channels via cable TV provider.
Off For using an antenna.
~
• You should run Auto Program after changing the Cable setting.
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on On/Off of Cable.
1
Select Auto Program.
2
Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.
3
Press RETURN to exit Auto Program.
~
• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with
the newly scanned channels.
the signal source. (Useful for antenna installation)
Allows you to show or hide channels when you surf with the CH +/– button or in the TV
channel list on the XMB
™
1
Press V/v to scroll through the channels until you highlight the channel to show or
hide.
2
Press to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
~
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
Assigns labels (such as station call letters) to channel numbers.
1
Press V/v to scroll through the channel numbers. Then press
number to assign a label.
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to
the next character. Repeat to add up to 7 characters to the label. Press
To assign labels to more channels, repeat steps 1-2.
.
to select the channel
to set it.