Getting Started; Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable Box/Digital Cable Box - Sony KDL-26S2000, KDL-32S2000, KDL-40S2000 Operating Instructions Manual

Getting Started

Connecting the TV

Cable System or
VHF/UHF Antenna
System
Cable Box/Digital
Cable Box
z To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Scan will fix the
channel automatically.
10
To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect
ratio (see "Changing the Wide Screen Mode" on page 20). It is strongly
recommended to connect the antenna/cable input using the supplied 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible.
You can also connect a variety of optional equipment to your TV (see page
13). For multiple equipment connections, please refer to the Quick Setup
Guide.
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
cable (supplied)
From the settings, select
Setup
Use this hookup if
s You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
s You do not intend to hook up any other audio or video equipment to
your TV.
Cable
IN
jack
Also, set to
Cable On
Rear of TV
VHF/UHF input
or for your type of input signal.
Cable On Cable Off
75-ohm coaxial
cable (supplied)
OUT
jack
in the settings (see page 31).
Setup
Rear of TV
VHF/UHF input