Installation; Bench Mounting - Makita DLS600 Instruction Manual

16 Lamp
20 Lever (for bevel angle
adjustment)
24 Laser switch

INSTALLATION

Bench mounting

WARNING:
Ensure that the tool does not
move on the supporting surface. Movement of the
miter saw on the supporting surface while cutting may
result in loss of control and serious personal injury.
1. Fix the base to a level and stable surface, screwing with
two bolts. This helps to prevent from tipping and possible injury.
► 1 . Bolt
24
23
22
21
20
17 Battery cartridge
21 Kerf board
- -
1
18 Hex wrench
22 Lower limit adjusting bolt
- -
8 ENGLISH
16
17
18
19
19 Release lever
23 Lamp switch
- -