Installation And Connection - Computherm Q7RF Operating Instructions Manual

and a wireless room thermostat and
COMPUTHERM
you wish to control several gas heaters with a single
room thermostat, you can accomplish this task by
means of a receiver unit.
COMPUTHERM Q7RF (RX)
A single wireless room thermostat can
COMPUTHERM
be synchronized with several
COMPUTHERM Q7RF
receiver units at the same time, and this make
(RX)
simultaneous control of several gas convectors feasible
(for more details please refer to Chapter 1).

1. INSTALLATION AND CONNECTION

OF THE RECEIVER UNIT
The receiver unit should be
COMPUTHERM Q7RF (TX)
mounted on the wall in a place protected against mois-
ture and heat, in the vicinity of the boiler. When choosing
the location of the receiving unit you should remember
that bulky metal objects (e.g. a boiler, buffer tank, etc.)
and metal building structures may have an adverse ef-
fect on propagation of radio waves. If it is possible, in
order to ensure trouble-free RF connection, we recom-
- 3 -