Supported Nvme I/O Commands; Supported Get Log; Smart Properties - Huawei ES3000 V3 User Manual

ES3000 V3 NVMe PCIe SSD
User Guide
l
l
A.2 Supported NVMe I/O Commands
The ES3000 V3 supports all mandatory NVMe I/O commands:
l
l
l
The ES3000 V3 also supports the following optional commands:
l
l
l
l
l
l
l
l
A.3 Supported Get Log Page Commands
The ES3000 V3 supports all get log page commands required by the NVMe 1.2 protocol. The
commands are as follows:
l
l
l
l
l
ES3000 V3 also supports the following custom log command:
Vendor unique SMART/health information (log identifier C0h)
Vendor Unique Addition SMART/Health Information (Log Identifier CAh)
A.4 SMART Properties
The ES3000 V3 supports the same SMART properties as the NVMe 1.2 protocol.
lists the SMART properties.
Issue 20 (2019-02-27)
Namespace Attachment
Format NVM (Huawei drivers and tools must be used if the format is DIF.)
Flush
Write
Read
Write Uncorrectable
Compare/ Fused operation
Write Zeroes
Dataset Management (De-allocate only)
Reservation Register
Reservation Report
Reservation Acquire
Reservation Release
Error information (log identifier 01h)
SMART/Health information (log identifier 02h)
Firmware slot information (log identifier 03h)
Changed namespace list (log identifier 04h)
Reservation notification (log identifier 80h)
Copyright © Huawei Technologies Co., Ltd.
A Supported NVMe Commands
Table A-1
135