Monoprice 36376 User Manual
Monoprice 36376 User Manual

Monoprice 36376 User Manual

Commercial audio 80-watt mini bluetooth amplifier

Advertisement

Quick Links

Commercial Audio
80-Watt Mini Bluetooth® Amplifier
P/N 36376
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 36376 and is the answer not in the manual?

Questions and answers

Summary of Contents for Monoprice 36376

  • Page 1 Commercial Audio 80-Watt Mini Bluetooth® Amplifier P/N 36376 User's Manual...
  • Page 2: Safety Warnings And Guidelines

    SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ...
  • Page 3 Use only in a well-ventilated area. Do not use in close,  confined spaces. Prior to operation, check the unit for physical damage. Do  not use if physical damage has occurred. Before plugging the unit into a power outlet, ensure that ...
  • Page 4: Customer Service

    If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
  • Page 5: Package Contents

    PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Commercial audio mini Bluetooth® amplifier 4x Screws...
  • Page 6: Installation

    INSTALLATION You can place the amplifier on a horizontal surface or mount it on a vertical surface. Perform the following steps to mount the amplifier to a wall. Note that it can be mounted in a horizontal or vertical orientation. Determine the mounting location and orientation.
  • Page 7: Physical Connections

    PHYSICAL CONNECTIONS Perform the following steps to make the physical connections needed to use this amplifier. 1. Ensure that all equipment to be connected is powered off and unplugged from its power source. 2. Using a 2-conductor speaker wire, connect the positive and negative leads to the right channel speaker, then connect the other end to the right channel Speaker Output terminals on the amplifier.
  • Page 8: Bluetooth Connection

    into a nearby AC power outlet. If you are using a line input connection, the LED Indicator will flash red. BLUETOOTH CONNECTION Perform the following steps to connect your mobile device using a Bluetooth® connection. Plug the amplifier into an AC power source. The amp is always in Bluetooth pairing mode whenever it is powered on and it is not already paired with another device.
  • Page 9: Technical Support

    TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
  • Page 10: Regulatory Compliance

    20 watts/channel into 8 Output Power (RMS) ohms 40 watts/channel into 8 Output Power (peak) ohms Frequency Response 20 Hz ~ 20 kHz Total Harmonic Distortion ≤ 0.1% Signal-to-Noise Ratio 82dB Input Power 100 ~ 240 VAC, 50/60 Hz 4.9" x 3.9" x 1.4" Dimensions (125 x 100 x 35 mm) Weight...
  • Page 11 Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
  • Page 12 Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is...
  • Page 13 Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with IC RSS-210. Operation is subject to the...

Table of Contents