Getting Started
Installing the TV
Preventing the TV
from Toppling Over
Bundling the
Connecting Cables
18
Attaching the Support Belt
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2
Attach the support belt to the stand with the securing screw (supplied)
using a coin, etc.
3
Adjust the length by pulling the support belt toward you while holding
the TV stand.
✍
Be sure to take measures to prevent the TV from toppling over and
causing injury.
✍
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough, use
commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the
TV stand. Consult your dealer about the types of screw.
You can bundle the connecting cables as illustrated below.
✍
Do not bundle the AC power cord with other connecting cables.
L
AUDIO
R
AUDIO
5
PC IN