To display the Picture settings, see "Navigating Through Settings"
(see page 32).
Select for enhanced picture contrast and sharpness.
Select for standard picture settings. Recommended for home
Allows you to store your preferred settings.
You can set up a Picture Mode (Vivid, Standard, Custom) independently for the
TV input and for each video input (Video 1 to Video 8). Your Picture Mode
settings are automatically saved upon selection.
Resets the current settings to the default values (except for Advanced Settings).
Adjust to brighten or darken the backlight.
Adjust to increase or decrease picture contrast.
Adjust to brighten or darken the picture.
Adjust to increase or decrease color intensity.
Adjust to increase or decrease the green tones.
Select to give the white colors a bluish tint.
Select to give the white colors a neutral tint.
Warm 1, 2
Select to give the white colors a reddish tint. Available only when
Picture Mode is set to Custom.
Adjust to sharpen or soften the picture.
Select to reduce the noise level of connected equipment, and the VHF/UHF or cable inputs.
Select from Auto, High, Medium, Low and Off.
Auto is not available when you are using either HDMI or component connections.
Produces a high-resolution picture for high-density sources (e.g., Blu-ray Disc Player, DVD
Player, satellite receiver).
Only available for 1080i format. Mode 2 is especially effective when
original standard-definition signals have been up-converted to 1080i
Select to turn off DRC Mode.
Using the Menus