Specifications - Sony BRAVIA KDL-40V5100 Getting Started Manual

Getting Started Operating the TV

Specifications

Model KDL-32XBR9
System
Television system NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output 10 W + 10 W
Input/Output jacks
CABLE/ANTENNA 75-ohm external terminal for RF inputs
VIDEO IN 1/2 S VIDEO (4-pin mini DIN) (VIDEO 2 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN 1/2 YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p,
75 ohms / PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits.
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
AUDIO OUT 500 mVrms (typical)
DIGITAL AUDIO PCM optical signal
OUT (OPTICAL)
PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference
PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms
USB USB input support mass storage device class (USB MSC) that may include thumbdrives, hard disks and some MP3 players and
cameras. This TV does not support MTP or PTP protocols used by some MP3 players and cameras.
Supported JPG files include those that are compliant with ISO/IEC 10918-1 JPEG specification (8 bit per component, Grayscale/Color,
Y:Cb:Cr=4:2:2 or Y:Cb:Cr=4:2:0, Base line DCT, Non-differential Huffman coding) and EXIF 2.2. Supported MP3 files bit rates in kpbs
include 40, 48, 56, 64, 80, 96, 112, 128,160, 192, 224, 256, 320 in both constant and variable rate. Scan frequencies supported
include 32, 44.1 and 48 Khz.
Power and others
Power requirement 120 V AC, 60 Hz
Power consumption
120 W
in use (maximum)
in standby
All models less than 1 W.
Screen size
31.5
(inches measured
(32 class)
diagonally)
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker/Full range
(2) (mm)
(inches)
Dimensions
(W × H × D)
with stand
(mm) 798 × 584 × 227
(inches) 31 1/2 × 23 × 9
without stand
(mm) 798 × 537 × 89
(inches) 31 1/2 × 21 1/4 × 3 5/8
wall-mount hole
200 × 200
pattern (mm)
wall-mount screw
size (mm)
Mass with stand
(kg) 13.4
(lb.) 29.6
without stand
(kg) 12.2
(lb.) 26.9
Supplied Remote control RM-YD028 (1) / Size AA batteries (2) / Cable holder (1 attached to the TV) / Operating Instructions (1) / Quick Setup
accessories Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) / Attaching the Table-Top stand (1) / Screws (4) (For KDL-52V5100
the screws are attached)
Using Features Using the Menus
KDL-40SL150 KDL-40V5100
Chart.
200 W 200 W
40 40
35 × 175
1 7/16 × 7
991 × 685 × 271 987 × 684 × 271
38 7/8 × 27 × 10 3/4 38 7/8 × 27 × 10 3/4
991 × 639 × 93 987 × 638 × 93
38 7/8 × 25 1/4 × 3 3/4 38 7/8 × 25 1/8 × 3 3/4
M6 (length: refer to diagram in the online Reference Book)
18.5 18.6
40.8 41.0
16.8 16.9
37.1 37.3
Other Information
KDL-46V5100 KDL-52V5100
245 W
46
1,123 × 772 × 323 1,262 × 871 × 362
44 1/4 × 30 1/2 × 12 3/4 49 3/4 × 34 3/8 × 14 3/8
1,123 × 725 × 96 1,262 × 823 × 115
44 1/4 × 28 5/8 × 3 7/8 49 3/4 × 32 1/2 × 4 5/8
300 × 300
25.5
56.2
22.6
49.8
Specifications
295 W
52
34.6
76.3
30.0
66.1