Using Wireless Microphones (Optional); Charging Mobile Devices - Omnitronic WAMS-08BT MK2 User Manual

Using wireless microphones (optional)

1) Connect the USB dongle to the USB port and switch on the microphones. Once the radio transmission is
established, the indicators on the dongle light up.
2) Speak into the microphones. The reception indicators on the PA system should light up. Adjust the
desired playback volume at the PA system.
Note
As the transmission quality depends on local conditions, please observe the following items for optimum
receiving:
• maintain a line-of-sight between the microphone and the PA system.
• make sure the distance between the microphones and the PA system is not too long.
• make sure the reception is not disturbed by objects in the transmission path; avoid placing the
microphones and the receiver where metal or other dense materials may be present and computers or
other HF-generating equipment (min. 50 cm distance).
• make sure the capacity of batteries is always sufficient.

Charging mobile devices

If the USB port (24) is not used for the USB dongle, you can use it to charge the batteries of mobile devices
up to max. 5V/1 A that are designed to do so and have the necessary USB connection (e.g. smartphone,
tablet etc.). Please observe the technical specifications of the devices you wish to connect. Connect the
mobile device to be charged by using a suitable USB cable and insert it into the USB port. The charging is
started.
28 • EN