Sony BRAVIA KDL-40XBR2 Operating Instructions Manual page 44

Using the Menus
Option
Clock/Timers
Language
Menu Color
Power Saving
Logo Illumination
Light Sensor
44
Description
Sleep Set the time in minutes (Off, 15 minutes, 30 minutes, 45 minutes,
60 minutes, 90 minutes or 120 minutes) that you want the TV to
remain on before shutting off automatically.
Timer 1
You can use the timers to turn the TV on, set the duration time the TV
will remain on, and tune to a specific channel at two scheduled times.
Timer 2
Timer 1 and Timer 2 will not be available until you set the Current
Time.
1
✍
2
3
4
Current Time You can set the current time.
1
2
3
Select to display all on-screen settings in your language of choice: English, Español,
Français.
Enables you to select a specific color for the on-screen settings.
Select to reduce the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from Off, Low, High and Picture Off.
Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.
Select On to enable the automatic picture (screen) brightness control. The light sensor
measures the room brightness which allows the TV to automatically adjust the backlight
brightness based on the picture settings and the ambient room light conditions.
✍
Be sure not to put anything around the sensor, as its function may be affected.
See page 30 for information about the sensor.
✍
In low light the range of the backlight control is reduced when Light Sensor is
set to On.
Press V/v to highlight Timer 1 or Timer 2. To set the timer,
press b.
To go directly to programming Timer 1 or 2, press
instead of pressing b.
Press V/v to highlight one of the following options, then press
.
Program: Select to set the timer by day, hour, minute, AM/PM,
Duration, and Channel.
Off: Select to turn off the timer. (Your previous settings are saved.)
If you selected Program in step 2, press V and v to set the
day(s), hour, minute, AM/PM, duration, and channel number.
or press b to confirm each setting and move to the
Press
next setting.
Press B to go back to the previous setting.
Press MENU to exit Settings.
Press to select Current Time.
Press V and v to set the current time (day, hour, minute, and
(or press b) to confirm each setting and
AM/PM). Press
move to the next setting. Press B to go back the previous setting.
Press MENU to exit Settings.