Safety Notices; General Safety Notices; Safety Standards; Intended Use - Leuze electronic MA 21 Technical Description

Connector unit as multinet plus slave and as protocol converter
Table of Contents

Advertisement

2

Safety notices

2.1

General safety notices

Documentation
All entries in this technical description must strictly be observed, in particular those in the
"Safety notices" section. Keep this technical description in a safe place. It should be acces-
sible at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.
Repair
Repairs must only be carried out by the manufacturer or an authorised representative.
2.2

Safety standards

The devices of the series MA 21 were developed, manufactured and tested in accordance
with the applicable safety standards. They correspond to the state of the art.
2.3

Intended use

Attention!
The protection of personnel and the device is guaranteed only if the device is operated in a
manner corresponding to its intended use.
Areas of application
The MA 21 connector unit is used to connect hand-held scanners or other devices featuring
an RS 232 interface to the Leuze multiNet plus network or to connect directly to a host
computer featuring an RS 232, RS 422, RS 485 or TTY interface.
Leuze electronic
MA 21
Safety notices
5

Advertisement

Table of Contents
loading

Table of Contents