ClearView HD4112 User Manual
  1. Manuals
  2. Brands
  3. ClearView Manuals
  4. Modulator
  5. HD4112
  6. User manual

ClearView HD4112 User Manual

Quad hdmi mpeg2 hd dvbt encoder modulator
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD4112 Quad HDMI MPEG2
HD DVBT
Encoder Modulator
U S E R M A N U A L
HD4112 Manual Rev 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD4112 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ClearView HD4112

Summary of Contents for ClearView HD4112

  • Page 1 HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 2...

  • Page 2: Table Of Contents

    3.2.3 Step 2: Adjust System Settings 4. FLOW CHART 5. QUICK MENU GUIDE 5.1 Sub Menu 6. OPERATION VIA FRONT BUTTONS 6.1 System and Info 6.2 Modulation Setting 6.3 Streaming Settings 7. SYSTEM SETTINGS HD4112 Manual Rev. 2 Manual Rev 1.0...

  • Page 3: General

    DIGITAL MODULATOR 1. GENERAL 1.1 Description The HD4112 modulator is able to generate 4 x RF signals in DVB-T format (Digital Terrestrial Television) from 4 x HDMI inputs. HD4112 is MPEG-2 encoding, 1080p, DVB-T modulation integrated into one device to convert 4 x HDMI signals to 4 DVB-T RF out.

  • Page 4: Specifications

    6 Local keys on front panel Web Management RJ-45 Ethernet port GENERAL Power Supply AC 100~240V 50/60Hz Consumption 20 W Languages English Dimensions 19” x 12.5” x 1.75” Weight 1.8Kg *Specifications subject to change without prior notice. HD4112 Manual Rev. 2 Manual Rev 1.0...

  • Page 5: Installation

    One HD4112 Encoder / Modulator One power cable 2.2 Connection The HD4112 unit comes standard with 4 x HDMI inputs. Use a quality 75Ω coaxial cable with “F” connectors from the unit’s RF OUT jack to the distribution system or directly to a television.

  • Page 6: Operating Instructions

    AC 100 to 240V / 50~60Hz HDMI Inputs Up to 1080p resolution RF output “F”-Female 75Ω ATTENTION! FOR THIS CONFIGURATION YOU SHOULD USE OUTPUT FREQUENCIES DIFFERENT FROM THE ONES THAT YOUR TV IS CURRENTLY USING HD4112 Manual Rev. 2 Manual Rev 1.0...

  • Page 7: Starting

    3.2 Starting 3.2.1 Beginning Setup DEVICE Programming and Setup 1. Apply power. 2. Connect Audio / Video source Connecting to the GUI Interface: 1. Connect an Ethernet cable directly to the Ethernet port on the rear panel of the encoder and then connect the Ethernet cable to an Ethernet switch /router or connect an Ethernet Cable to your PC.
  • Page 8 3.2.3 Step 2: Adjust Transport Stream Settings Click on SETUP then on SETUP/TS: Set your TS settings for each channel then press Save Settings at the left-hand side. Once you have set all parameters and pressed Save Settings, finally press Save Setting and Reboot System to store permanently.

  • Page 9: Flow Chart

    4. Flow Chart...

  • Page 10: Quick Menu Guide

    5. Quick Menu Guide...

  • Page 11: Sub Menu

    5.1 Sub Menu...

  • Page 12: Operation Via Front Buttons

    6. Operation Via Front Buttons 6.1 System & Info 6.2 Modulation Setting...
  • Page 13 1) Download software to USB disk. Unzip. Only 'image.hex' from the HD4112 folder should be on the USB stick. 2) Insert the USB stick to the slot of USB Upgrade while HD4112 is powered off. 3) Keep pressing the OK button and power on HD4112. One LED illuminates and flickers.

  • Page 14: System Settings

    7. System Setting Press Setup then Setup System You can reset the unit to Factory Default or just Hardware Reset by clicking on this dropdown here. Be sure to always press the Save Settings to the left after selecting your option.

Table of Contents