Advertisement
Quick Links
OWNER'S /
OPERATOR'S
MANUAL
MODEL NO.'s
MPF-1200
MPF-1200B/G
MPF-2000
MPF-2000B/G
SSPF-1236
SSPF-242
JDPF-1236
JDPF-1242
JDPF-2000
FLPF-2000
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SI NO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Do not lift heavy parts or assemblies. Use crane, jack,
tackle, fork trucks or other mechanical devices.
2. Preview the assembly instructions in your operator's
manual before proceeding further.
3. If the assembly instructions call for parts or assemblies to
be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked.
4. Never put hands, or any part of body, under blocked up
assemblies if at all possible.
SSPF-242
PALLET FORK
for COMPACT TRACTOR
MINI SKID STEER UNITS
Safety Instructions
Tractor Preparation
Operating Instructions
CAUTION
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
SSPF-1236
FRONT LOADERS and
5. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.
6. Before operating the machine, thoroughly read the
operation section of your operator's manual.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your dealer or representative.
MPF-2000
JDPF-1236
Assembly & Mounting
Maintenance
Repair Parts
Advertisement
Related Manuals for Worksaver MPF-1200
Summary of Contents for Worksaver MPF-1200
- Page 1 OWNER’S / OPERATOR’S MANUAL MODEL NO.’s MPF-2000 SSPF-1236 MPF-1200 MPF-1200B/G MPF-2000 MPF-2000B/G SSPF-1236 SSPF-242 SSPF-242 JDPF-1236 JDPF-1236 JDPF-1242 PALLET FORK JDPF-2000 FLPF-2000 for COMPACT TRACTOR FRONT LOADERS and CAUTION For Safe Operation MINI SKID STEER UNITS Read Rules And Instructions Carefully...
- Page 2 Like all mechanical products, it will require cleaning and upkeep. Use only genuine Worksaver, Inc. service parts. Substitute parts will void the warranty and may not meet stan- dards required for safe and satisfactory operation. Record the model and serial number of your Pallet Fork here: Model:________________________________________ Serial Number:_______________________________ RETAIL CUSTOMER’S RESPONSIBILITY...
-
Page 3: Warranty
2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole judgement of Worksaver such use affects its performance, stability, or reliability. -
Page 4: Safety Information
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. - Page 5 SAFETY INSTRUCTIONS (continued) EQUIPMENT SAFETY GUIDELINES Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.
- Page 6 SAFETY INSTRUCTIONS (continued) OPERATIONAL SAFETY Start prime mover only when properly seated in the operator’s seat. Starting a prime mover in gear can result in injury or death. Do not mount or dismount while the prime mover is moving. Mount or dismount only when the prime mover and all moving parts are completely stopped.
- Page 7 SAFETY INSTRUCTIONS (continued) OPERATIONAL SAFETY (continued) Do not allow children or others to ride on the power unit with an operator. Riders are subject to injury such as being struck by foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe oper- ation.
- Page 8 SAFETY INSTRUCTIONS (continued) OPERATIONAL SAFETY (continued) Be certain the power unit is in neutral or park position before starting engine. Always shut off power unit and shift to “Park” or set brakes when leaving unit. Always lower bucket or attachment to ground, relieve all hydraulic pressure. Remove key when leaving equipment unattended. Park in level area.
- Page 9 SAFETY INSTRUCTIONS (continued) TRANSPORT SAFETY Comply with state and local laws governing highway safety and movement of farm machinery on public roads. The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. Local laws should be checked for all highway lighting and marking requirements. When driving the tractor and equipment on the road or highway under 20 mph (32 kph) at night or during the day, use flashing amber warning lights and a slow moving vehicle (SMV) identification emblem.
- Page 10 SAFETY INSTRUCTIONS (continued) MAINTENANCE SAFETY Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. Before working on this machine, drive to a level area, disengage the PTO, lower implement or loader (or if working underneath, raise and block securely), shut off the engine, relieve all hydraulic pressure, set the brakes, and remove the ignition keys.
- Page 11 SAFETY INSTRUCTIONS (continued) STORAGE SAFETY Following operation or when unhooking, stop the tractor, set the brakes, shut off the engine, relieve all hydraulic pressure and remove the ignition keys. Store the unit in an area away from human activity. Do not permit children to play on or around the stored unit. Do not park equipment where it will be exposed to livestock for long periods of time.
-
Page 12: Safety Signs
SAFETY SIGNS BE CAREFUL! Use a clean, damp cloth to clean safety decals. Avoid spraying too close to decals when using a pres- sure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off. REMEMBER: If Safety Signs have been dam- aged, removed, become illegible or... -
Page 13: Instructions
MPF-1200 1200 # 36” When lifting loads with a tractor front loader, it is always MPF-1200 B/G 1200 # 36” best to have a heavy implement or weight box connected to the rear 3 pt. hitch. - Page 14 Mini Skid Steer units equipped with the "Universal" type attachment on the loader. MODELS JDPF-1236, JDPF-1242 The Model MPF-1200 can handle loads up to 1,200 Ibs. The Model MPF-2000 can handle loads up to 2,000 Ibs. & JDPF-2000 ——————————————————...
- Page 15 INSTRUCTIONS (continued) MODEL FLPF-2000 COMPACT TRACTOR —————————————————— LOADER BRACKETS FOR The Universal Model FLPF-2000 Pallet Fork attachment MODEL FLPF-2000 PALLET FORK is recommended for tractors with an engine horsepower rating of 20-40 hp. Optional brackets are available to fit both pin-on and some popular quick coupler front-end loaders.
- Page 16 INSTRUCTIONS (continued) MODELS SSPF-1236, SSPF-2000, MPF-1200, MPF-1200B/G, MPF-2000, MPF-2000B/G ATTACHMENT TO PRIME MOVER —————————————————— WARNING Improper attachment of the Pallet Fork could result in injury or death. Do not operate this product until you have positive indication that the attachment is securely mounted.
- Page 17 INSTRUCTIONS (continued) MODELS JDPF-1236, JDPF-1242 & JDPF-2000 ATTACHMENT TO PRIME MOVER —————————————————— The Pallet Fork Models JDPF-1236 and JDPF-1242 are specifically designed for John Deere 200 and 300 series loaders. It is rated for loads up to 1,250 lbs. The Pallet Fork Model JDPF-2000 is specifically designed for John Deere 200 and 300 series loaders.
- Page 18 OPERATING INSTRUCTIONS OPERATION WARNING —————————————————— ■ ■ Rear ballast is required to ensure 25% of gross vehicle weight is transferred to the rear axle. Safety is a primary concern in the design and manufacture of our products. Unfortunately, our Attachment and load must be included as weight. efforts to provide safe equipment can be wiped out Adequate rear weights are required to counterbal- by an operator’s single careless act.
-
Page 19: Instructions
OPERATING INSTRUCTIONS (continued) OPERATION TRANSPORTING (continued) —————————————————— —————————————————— CAUTION CAUTION A heavy load can cause your prime mover to tip When traveling on public roads, whether at night or over. When moving heavy loads, keep the load low, during the day, use accessory light and devices for go slowly around turns, and be sure the prime mover adequate warnings to operators of other vehicles. - Page 20 MODEL MPF-1200 & MPF 1200B/G PARTS LIST...
- Page 21 MODELS MPF-2000 & MPF-2000B/G PARTS LIST...
- Page 22 MODEL SSPF-1236 PARTS LIST...
- Page 23 MODEL SSPF-242 PARTS LIST...
- Page 24 MODELS JDPF-1236 & JDPF-1242 PARTS LIST...
- Page 25 MODEL JDPF-2000 PARTS LIST...
- Page 26 MODEL FLPF-2000 PARTS LIST...
- Page 27 OPTIONAL BACKSTOP PARTS LIST FOR MODELS: MPF-1200, MPF-1200B/G, SSPF-1236, JDPF-1236, JDPF-1242...
- Page 28 Please work, drive, play, and live each day with care JDPF-1242 and concern for your safety and that of your family and JDPF-2000 fellow citizens. FLPF-2000 FEBRUARY 2017 WORKSAVER, INC. P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973 WEB: http:// www.worksaver.com E-MAIL: sales@worksaver.com WS-PF002-OG...
Need help?
Do you have a question about the MPF-1200 and is the answer not in the manual?
Questions and answers