Table of Contents
Advertisement
Function How Long To Hold
To Enable/Disable Alert Quickly press Compass's center button.
Power Down Hold Compass's center button for 5 seconds.
Battery Life Compass will indicate "low battery" by
Master Sensitivity Settings
(FOR MANAGEMENT ONLY)
When approaching a
flash visual warnings. The device will also issue an audible warning.
A
Red Warning
detected
SALES@SAFEGUARDEQUIPMENT.COM
Basic Menu Functions
Green enables alerts, Red disables alerts.
Corner lights turn purple.
flashing red lights (every 5 seconds) which
act as an indication that the battery level
is less than 15%. The flashing lights, or
"heartbeats, " will only be seen when battery
life reaches this level and will continue until
battery is dead.
Plug device into the micro USB to begin
charging, then hold the center button for
5 seconds. Red lights represent voltage
detection, blue lights represent current
detection. To INCREASE or DECREASE
sensitivity, quickly press button ONCE
until desired sensitivity is displayed. Then
HOLD to confirm sensitivity. You are then
transitioned into the current detection
mode. When desired sensitivity is selected,
unplug Compass.
VOLTAGE
indicates
AC
VOLTAGE.
or
CURRENT
source the LED bar will
A
Blue Warning
detected
AC
(208) 773-9263
indicates
CURRENT.
A Product of
All rights reserved © 2018
Advertisement
Table of Contents
