SafeGuard Compass User Manual page 7

Personal voltage & current detector
Hide thumbs Also See for Compass:
Table of Contents

Advertisement

Proximity Alerts (High Sensitivity)
The Compass issues proximity alerts until information is gathered to then approximate the direction to the source.
In proximity mode, the curved LED bar is illuminated. The closer the user gets to a source; the more LEDs will
light up and the frequency of those alerts will increase. Proximity mode works in every sensitivity level. Refer to
the illustrations below for a proximity distances when setting is at the default (HIGH) level. The models below
represent the process practiced by Safeguard Equipment to verify Compass's detection distances. The "busbar"
shown was elevated three (3) feet above ground. Detection distances will vary as the height of the conductor
changes.
WHEN USING COMPASS, USERS SHOULD KNOW THE FOLLOWING:
The tone of the audible alerts are constant.
The
VOLTAGE
warnings are given priority over
If a conductor is on or near the ground, the warning distances will be dramatically reduced and can sometimes
result in unsafe warning distances.
20 ft
Proximity Alert Distance: Sensitivity set to HIGH
20 ft
Proximity Alert Distance: Sensitivity set to HIGH
20 ft
Proximity Alert Distance: Sensitivity set to HIGH
SALES@SAFEGUARDEQUIPMENT.COM
First Alert: 12 ft
Max Alert: 6 ft
First Alert: 14 ft
Max Alert: 7 ft
First Alert: 16 ft
Max Alert: 8 ft
CURRENT
warnings if both are present.
0 ft
2.4 kV
Busbar
0 ft
4.2 kV
Busbar
0 ft
7.2 kV
Busbar
(208) 773-9263
Detection Range: 2.4 kV
The first alert will be provided at
12 feet. As the user moves forward,
they will receive the maximum alert
at 6 feet. The sensitivity of Compass
is set to high.
Detection Range: 4.2 kV
The first alert will be provided at
14 feet. As the user moves forward,
they will receive the maximum alert
at 7 feet. The sensitivity of Compass
is set to high. In this illustration it is
important to note that the detection
distance has been extended.
Detection Range: 7.2 kV
The first alert will be provided at
16 feet. As the user moves forward,
they will receive the maximum
alert at 8 feet. The sensitivity of
Compass is set to high. In this
illustration it is important to note
that the detection distance has
been extended.
A Product of
All rights reserved © 2018

Advertisement

Table of Contents
loading

Table of Contents