Maintenance & Inspection; Maintenance - Pelsue PH Series Product Manual

1. Read, understand and follow the User Manual and labelling
on the hoist before using, maintaining or inspecting the
equipment.
2. A regular inspection program is imperative for all confined
space entry/retrieval equipment and to maintain docu-
mented results of these inspections. Follow the inspection
procedure contained in this manual and use the sample
inspection form to document the results.
The following section will address preventative maintenance points of service, that performed periodically will drastically
increase the working life of the PH Series Personnel Hoist. Preventative maintenance will ensure that the PH Series
Personnel Hoist is always in optimum working condition.
LUBRICANTS
1. Grease:
Use a SAE multi- purpose high temperature grease with extreme pressure (EP) performance. Also acceptable is a
SAE multi-purpose lithium base grease.
2. Cable (If hoist line is stainless steel cable):
Clean with WD-40 or other light de-greaser and wipe with clean rag.
MAINTENANCE INTERVALS
Daily
1. Visual Inspection
Perform a complete visual inspection. Remove from service if a defect is found.
Weekly
1. Functional Inspection
Perform a functional inspection. Record results and keep documentation.
Bi-Annually
1. Lubricate Shaft Bearings Using SAE 30W Oil
a. Pinion Shaft (3 locations) See Figure 6a.
501144-001 - Product Manual - PH Series Personnel Hoists - Revison 03 Revision Date - 2018-06-13
6.0 - Maintenance & Inspection
3. keep instructional and safety labels clean and legible at
all times. Clean or replace as required.
4. Lubricate hoist as per instructions in Section 6.
5. Remove the equipment from service if a problem is found
during the inspection. Return to an authorized repair depot
or the factory for service.

6.1 - Maintenance

Page 21