Advertisement
Dimension drawing of indoor unit installation
8"above
1. Make a hole with an electric hammer or a
water drill at the predetermined position on
the wall for piping, which shall slant outwardly
°
°
by 5
-10
.
2. To protect the piping and the cables from
being damaged running through the wall,
and from the rodents that may inhabit in
the hollow wall, a pipe protecting ring shall
be installed and sealed with putty.
Note: Usually, the wall hole is <1>2.4"~<l>3.2".
Avoid pre-buried power wire and hard wall
when making the hole.
Space to the ceiling
6"above
7 ft above
Space to the floor
Mounting plate
Wall-through Hole
Install indoor uni
8"
Advertisement
