Sony BRAVIA 4-160-344-11(1) Operating Instructions Manual page 8

4
When the Eco Preset menu appears on
the screen, press
"No", then press
"Eco" settings are changed to
recommended values to reduce power
consumption.
Do you want to use the Eco Preset?
Choosing "YES" will reduce power consumption.
Power Saving
Idle TV Standby
PC Power Management
Yes
The TV has now tuned in all the available
channels.
~
• When a digital broadcast channel cannot be received, or
when selecting a region in which there are no digital
broadcasts, the time must be set after performing step 2.
To tune the TV for Cable connection
1
Press .
F f
2
Press / to select "Quick Scan" or "Full
Scan", then press
"Quick Scan" : channels are tuned according to
the cable operator information within the
broadcast signal.
Recommended setting for "Frequency",
"Network ID" and "Symbol Rate" is "Auto".
This option is recommended for fast tuning
when supported by your cable operator.
If the "Quick Scan" does not tune, please use the
"Full Scan" method below.
"Full Scan" : All available channels are tuned
and stored. This procedure may take some time.
This option is recommended when "Quick Scan"
is not supported by your cable provider.
For further information about supported cable
providers, refer to support web site:
http://support.sony-europe.com/TV/DVBC
G g f
3
Press / / to select "Start".
The TV starts searching for channels. Do not
press any buttons on the TV or remote.
~
• Some cable providers do not support "Quick Scan". If no
channels are detected using "Quick Scan", perform "Full
Scan".
8
GB
G g
/ to select "Yes" or
. If you press "Yes", the
Eco Preset
Reduce
3 h
On
No
.
Detaching the Table-
Top Stand from the TV
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
Table-Top
Stand