(Only in analogue
You can update the TV system using USB memory. Obtain information from the
Changes the available analogue channel setting.
Press F/f to select the programme number you want to modify. Then, press
Presets programme channels manually.
to select "System", then press
to select one of the following TV broadcast systems, then
B/G: For western European countries/regions
I: For the United Kingdom
D/K: For eastern European countries/regions
L: For France
• Depending on the country/region selected for "Country" (page 6), this option may not be
to select "Channel", then press
to select "S" (for cable channels) or "C" (for terrestrial
channels), then press
Tune the channels as follows:
If you do not know the channel number (frequency)
Press F/f to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
to jump to "Confirm", then press
Repeat the procedure above to preset other channels manually.
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting "Off".
• "Audio Filter" is not available when "System" is set to "L".
Skips unused analogue channels when you press PROG +/- to select channels. (You
can still select a skipped channel using the number buttons.)
Saves changes made to the "
Manual Programme Preset