Idle TV Standby
(only in PC mode)
Selects the power saving mode to reduce the power consumption of the TV.
"Standard": Default settings.
"Reduce": Reduces the power consumption of the TV.
"Picture Off": Switches off the picture. You can listen to the sound with the picture
Selects the time ("1h", "2h" or "3h") to set the TV into standby mode automatically,
if you do not operate the TV for the specified period of time.
When this is set to "On," turns to standby mode if no PC signal is received. Only
available in PC input.
Resets all the "Eco" settings to the factory settings.
Changes the screen format. For details about the screen format, see page 14.
"Normal": Displays the picture in its original size.
"Full": Enlarges the picture to fill the display area.
Adjusts the horizontal picture position so that the picture is in the middle of the
• This option is only available if an RGB source has been connected to the Scarts connectors
Customizes the TV screen as a PC monitor.
• This option is only available if a PC signal is received.
"Phase": Adjusts the screen when a part of a displayed text or image is not clear.
"Pitch": Enlarges or shrinkes the screen size horizontally.
"Horizontal Shift": Moves the screen to the left or to the right.
"Vertical Shift": Moves the screen up or down.
"Reset": Resets to the factory settings.
Sets a period of time after which the TV automatically switches itself into standby mode.
When the "Sleep Timer" is activated, the
panel lights up in orange.
• When you turn off the TV and turn it on again, "Sleep Timer" is reset to "Off".
• A notification message appears on the screen one minute before the TV switches to standby mode.
Adjusts the external clock illumination.
Adjusts the time manually.
AV2 on the rear of the TV.
(Sleep Timer) indicator on the TV front