Maintenance - Taylor Tools Bronco 260P-HL Owner's Manual

Maintenance:

Keep the machine in good condition. Maintain
it as directed in this manual and the
motor manual for propane machines. Check
fasteners and hydraulic hose connections
at the end of each day of operation. Check
the oil level and fill if necessary. Tighten
and repair as necessary. Before doing any
maintenance, turn machine off and disconnect
from power supply.
Hood Opening Procedure
1. You will need a 3/4" wrench.
2. Shut machine off / unplug electric machine.
3. Remove blade clamp to allow the hood to
open fully.
4. Remove hand fastener on fan cover box and
lift the box assembly up and out, being carful not
to damage the electrical connection to the fan.
5. While holding the fan box assembly, release
the connector clip to disconnect the electrical
wiring from the box assembly.
6. Remove the six (6) 5/16" bolts that secure the
control levers to the machine.
7. Under the rear portion of the seat, you will
find a metal cross member that joins each side of
the machine's wieghts. Completely remove this
cross member by removing the two (2) 1/2"
bolts.
8. Locate the two clips (one on each side) on the
back side of the frame adjacent to the propane
regulator and release them.