Specifications - Taylor Tools Bronco 260P-HL Owner's Manual

Safety Alert Symbol and Notations
READ AND UNDERSTAND THIS
IMPORTANT SAFETY INFORMA-
TION BEFORE
THIS MACHINE!
The following safety notations are used
throughout this manual to call attention to
special information or operating procedures.
Understand the message in each notation and
be alert to unsafe conditions and the possibil-
ity of personal injury.
Note
: A NOTE points out general reference
information regarding proper operation and
maintenance practices.
Important
: An IMPORTANT statement
indicates specific procedures or information
that is required to prevent damage to the
machine, it's attachments or property.
Length: 48" - 54"
Width : 29"
Height to top of seat: 48"
Gross Weight: 1240 lbs.
Net Weight without weights: 688 lbs.
Electric Motor: 7-1/2 hp, 220 volts,
OPERATING

Specifications

Specification are approximate and subject to change without notice
This safety alert symbol is used to attract
your attention as PERSONAL SAFETY
IS INVOLVED! When you see this
symbol BECOME ALERT, HEED IT'S
MESSAGE.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz-
ardous situation which, if not avoided,
may result in minor or moderate injury. It
is also used to alert against unsafe prac-
tices.
single phase, rpm 3450
Propane Motor: 17 hp Kawasaki
Tire Specification: 10.5"x 6"x 5" Super
Solid non-marking
Top speed: 500 feet per minute